Add to Chrome
Add to Firefox
Add to EdgeStabilizing Efficient Reasoning with Step-Level Advantage Selection
Apr 27, 2026
Large language models (LLMs) achieve strong reasoning performance by allocating substantial computation at inference time, often generating long and verbose reasoning traces. While recent work on efficient reasoning reduces this overhead through length-based rewards or pruning, many approaches are post-trained under a much shorter context window than base-model training, a factor whose effect has not been systematically isolated. We first show that short-context post-training alone, using standard GRPO without any length-aware objective, already induces substantial reasoning compression-but at the cost of increasingly unstable training dynamics and accuracy degradation. To address this, we propose Step-level Advantage Selection (SAS), which operates at the reasoning-step level and assigns a zero advantage to low-confidence steps in correct rollouts and to high-confidence steps in verifier-failed rollouts, where failures often arise from truncation or verifier issues rather than incorrect reasoning. Across diverse mathematical and general reasoning benchmarks, SAS improves average Pass@1 accuracy by 0.86 points over the strongest length-aware baseline while reducing average reasoning length by 16.3%, yielding a better accuracy-efficiency trade-off.
LASQ: A Low-resource Aspect-based Sentiment Quadruple Extraction Dataset
Apr 12, 2026In recent years, aspect-based sentiment analysis (ABSA) has made rapid progress and shown strong practical value. However, existing research and benchmarks are largely concentrated on high-resource languages, leaving fine-grained sentiment extraction in low-resource languages under-explored. To address this gap, we constructed the first Low-resource languages Aspect-based Sentiment Quadruple dataset, named LASQ, which includes two low-resource languages: Uzbek and Uyghur. Secondly, it includes a fine-grained target-aspect-opinion-sentiment quadruple extraction task. To facilitate future research, we designed a grid-tagging model that integrates syntactic knowledge. This model incorporates part-of-speech (POS) and dependency knowledge into the model through our designed Syntax Knowledge Embedding Module (SKEM), thereby alleviating the lexical sparsity problem caused by agglutinative languages. Experiments on LASQ demonstrate consistent gains over competitive baselines, validating both the dataset's utility and the effectiveness of the proposed modeling approach.
Design Once, Deploy at Scale: Template-Driven ML Development for Large Model Ecosystems
Mar 26, 2026Modern computational advertising platforms typically rely on recommendation systems to predict user responses, such as click-through rates, conversion rates, and other optimization events. To support a wide variety of product surfaces and advertiser goals, these platforms frequently maintain an extensive ecosystem of machine learning (ML) models. However, operating at this scale creates significant development and efficiency challenges. Substantial engineering effort is required to regularly refresh ML models and propagate new techniques, which results in long latencies when deploying ML innovations across the ecosystem. We present a large-scale empirical study comparing model performance, efficiency, and ML technique propagation between a standardized model-building approach and independent per-model optimization in recommendation systems. To facilitate this standardization, we propose the Standard Model Template (SMT) -- a framework that generates high-performance models adaptable to diverse data distributions and optimization events. By utilizing standardized, composable ML model components, SMT reduces technique propagation complexity from $O(n \cdot 2^k)$ to $O(n + k)$ where $n$ is the number of models and $k$ the number of techniques. Evaluating an extensive suite of models over four global development cycles within Meta's production ads ranking ecosystem, our results demonstrate: (1) a 0.63% average improvement in cross-entropy at neutral serving capacity, (2) a 92% reduction in per-model iteration engineering time, and (3) a $6.3\times$ increase in technique-model pair adoption throughput. These findings challenge the conventional wisdom that diverse optimization goals inherently require diversified ML model design.
Code-MIE: A Code-style Model for Multimodal Information Extraction with Scene Graph and Entity Attribute Knowledge Enhancement
Mar 21, 2026With the rapid development of large language models (LLMs), more and more researchers have paid attention to information extraction based on LLMs. However, there are still some spaces to improve in the existing related methods. First, existing multimodal information extraction (MIE) methods usually employ natural language templates as the input and output of LLMs, which mismatch with the characteristics of information tasks that mostly include structured information such as entities and relations. Second, although a few methods have adopted structured and more IE-friendly code-style templates, they just explored their methods on text-only IE rather than multimodal IE. Moreover, their methods are more complex in design, requiring separate templates to be designed for each task. In this paper, we propose a Code-style Multimodal Information Extraction framework (Code-MIE) which formalizes MIE as unified code understanding and generation. Code-MIE has the following novel designs: (1) Entity attributes such as gender, affiliation are extracted from the text to guide the model to understand the context and role of entities. (2) Images are converted into scene graphs and visual features to incorporate rich visual information into the model. (3) The input template is constructed as a Python function, where entity attributes, scene graphs and raw text compose of the function parameters. In contrast, the output template is formalized as Python dictionaries containing all extraction results such as entities, relations, etc. To evaluate Code-MIE, we conducted extensive experiments on the M$^3$D, Twitter-15, Twitter-17, and MNRE datasets. The results show that our method achieves state-of-the-art performance compared to six competing baseline models, with 61.03\% and 60.49\% on the English and Chinese datasets of M$^3$D, and 76.04\%, 88.07\%, and 73.94\% on the other three datasets.
VideoSeek: Long-Horizon Video Agent with Tool-Guided Seeking
Mar 20, 2026Video agentic models have advanced challenging video-language tasks. However, most agentic approaches still heavily rely on greedy parsing over densely sampled video frames, resulting in high computational cost. We present VideoSeek, a long-horizon video agent that leverages video logic flow to actively seek answer-critical evidence instead of exhaustively parsing the full video. This insight allows the model to use far fewer frames while maintaining, or even improving, its video understanding capability. VideoSeek operates in a think-act-observe loop with a well-designed toolkit for collecting multi-granular video observations. This design enables query-aware exploration over accumulated observations and supports practical video understanding and reasoning. Experiments on four challenging video understanding and reasoning benchmarks demonstrate that VideoSeek achieves strong accuracy while using far fewer frames than prior video agents and standalone LMMs. Notably, VideoSeek achieves a 10.2 absolute points improvement on LVBench over its base model, GPT-5, while using 93% fewer frames. Further analysis highlights the significance of leveraging video logic flow, strong reasoning capability, and the complementary roles of toolkit design.
Ruyi2.5 Technical Report
Mar 18, 2026We present Ruyi2.5, a multimodal familial model built on the AI Flow framework. Extending Ruyi2's "Train Once, Deploy Many" paradigm to the multimodal domain, Ruyi2.5 constructs a shared-backbone architecture that co-trains models of varying scales within a single unified pipeline, ensuring semantic consistency across all deployment tiers. Built upon Ruyi2.5, Ruyi2.5-Camera model is developed as a privacy-preserving camera service system, which instantiates Ruyi2.5-Camera into a two-stage recognition pipeline: an edge model applies information-bottleneck-guided irreversible feature mapping to de-identify raw frames at the source, while a cloud model performs deep behavior reasoning. To accelerate reinforcement learning fine-tuning, we further propose Binary Prefix Policy Optimization (BPPO), which reduces sample redundancy via binary response selection and focuses gradient updates on response prefixes, achieving a 2 to 3 times training speedup over GRPO. Experiments show Ruyi2.5 matches Qwen3-VL on the general multimodal benchmarks, while Ruyi2.5-Camera substantially outperforms Qwen3-VL on privacy-constrained surveillance tasks.
Privacy-Aware Camera 2.0 Technical Report
Mar 05, 2026With the increasing deployment of intelligent sensing technologies in highly sensitive environments such as restrooms and locker rooms, visual surveillance systems face a profound privacy-security paradox. Existing privacy-preserving approaches, including physical desensitization, encryption, and obfuscation, often compromise semantic understanding or fail to ensure mathematically provable irreversibility. Although Privacy Camera 1.0 eliminated visual data at the source to prevent leakage, it provided only textual judgments, leading to evidentiary blind spots in disputes. To address these limitations, this paper proposes a novel privacy-preserving perception framework based on the AI Flow paradigm and a collaborative edge-cloud architecture. By deploying a visual desensitizer at the edge, raw images are transformed in real time into abstract feature vectors through nonlinear mapping and stochastic noise injection under the Information Bottleneck principle, ensuring identity-sensitive information is stripped and original images are mathematically unreconstructable. The abstract representations are transmitted to the cloud for behavior recognition and semantic reconstruction via a "dynamic contour" visual language, achieving a critical balance between perception and privacy while enabling illustrative visual reference without exposing raw images.
Perceptual Quality Optimization of Image Super-Resolution
Feb 25, 2026Single-image super-resolution (SR) has achieved remarkable progress with deep learning, yet most approaches rely on distortion-oriented losses or heuristic perceptual priors, which often lead to a trade-off between fidelity and visual quality. To address this issue, we propose an \textit{Efficient Perceptual Bi-directional Attention Network (Efficient-PBAN)} that explicitly optimizes SR towards human-preferred quality. Unlike patch-based quality models, Efficient-PBAN avoids extensive patch sampling and enables efficient image-level perception. The proposed framework is trained on our self-constructed SR quality dataset that covers a wide range of state-of-the-art SR methods with corresponding human opinion scores. Using this dataset, Efficient-PBAN learns to predict perceptual quality in a way that correlates strongly with subjective judgments. The learned metric is further integrated into SR training as a differentiable perceptual loss, enabling closed-loop alignment between reconstruction and perceptual assessment. Extensive experiments demonstrate that our approach delivers superior perceptual quality. Code is publicly available at https://github.com/Lighting-YXLI/Efficient-PBAN.
OmniCT: Towards a Unified Slice-Volume LVLM for Comprehensive CT Analysis
Feb 18, 2026Computed Tomography (CT) is one of the most widely used and diagnostically information-dense imaging modalities, covering critical organs such as the heart, lungs, liver, and colon. Clinical interpretation relies on both slice-driven local features (e.g., sub-centimeter nodules, lesion boundaries) and volume-driven spatial representations (e.g., tumor infiltration, inter-organ anatomical relations). However, existing Large Vision-Language Models (LVLMs) remain fragmented in CT slice versus volumetric understanding: slice-driven LVLMs show strong generalization but lack cross-slice spatial consistency, while volume-driven LVLMs explicitly capture volumetric semantics but suffer from coarse granularity and poor compatibility with slice inputs. The absence of a unified modeling paradigm constitutes a major bottleneck for the clinical translation of medical LVLMs. We present OmniCT, a powerful unified slice-volume LVLM for CT scenarios, which makes three contributions: (i) Spatial Consistency Enhancement (SCE): volumetric slice composition combined with tri-axial positional embedding that introduces volumetric consistency, and an MoE hybrid projection enables efficient slice-volume adaptation; (ii) Organ-level Semantic Enhancement (OSE): segmentation and ROI localization explicitly align anatomical regions, emphasizing lesion- and organ-level semantics; (iii) MedEval-CT: the largest slice-volume CT dataset and hybrid benchmark integrates comprehensive metrics for unified evaluation. OmniCT consistently outperforms existing methods with a substantial margin across diverse clinical tasks and satisfies both micro-level detail sensitivity and macro-level spatial reasoning. More importantly, it establishes a new paradigm for cross-modal medical imaging understanding.
Generative Reasoning Re-ranker
Feb 08, 2026Recent studies increasingly explore Large Language Models (LLMs) as a new paradigm for recommendation systems due to their scalability and world knowledge. However, existing work has three key limitations: (1) most efforts focus on retrieval and ranking, while the reranking phase, critical for refining final recommendations, is largely overlooked; (2) LLMs are typically used in zero-shot or supervised fine-tuning settings, leaving their reasoning abilities, especially those enhanced through reinforcement learning (RL) and high-quality reasoning data, underexploited; (3) items are commonly represented by non-semantic IDs, creating major scalability challenges in industrial systems with billions of identifiers. To address these gaps, we propose the Generative Reasoning Reranker (GR2), an end-to-end framework with a three-stage training pipeline tailored for reranking. First, a pretrained LLM is mid-trained on semantic IDs encoded from non-semantic IDs via a tokenizer achieving $\ge$99% uniqueness. Next, a stronger larger-scale LLM generates high-quality reasoning traces through carefully designed prompting and rejection sampling, which are used for supervised fine-tuning to impart foundational reasoning skills. Finally, we apply Decoupled Clip and Dynamic sAmpling Policy Optimization (DAPO), enabling scalable RL supervision with verifiable rewards designed specifically for reranking. Experiments on two real-world datasets demonstrate GR2's effectiveness: it surpasses the state-of-the-art OneRec-Think by 2.4% in Recall@5 and 1.3% in NDCG@5. Ablations confirm that advanced reasoning traces yield substantial gains across metrics. We further find that RL reward design is crucial in reranking: LLMs tend to exploit reward hacking by preserving item order, motivating conditional verifiable rewards to mitigate this behavior and optimize reranking performance.